KINGKONG / LDARC 130GT 130mm Kohlefaser FPV Racing Rahmen w / 5V 12 V PDB für RC Drone
Ein Teil der Rezension wurde automatisch übersetzt.
Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.
The Frame is 2mm thin so 20% of the material is missing. The arms are beding if i Punch out and the props hit the top plate. its realy sad i like this Frame but if you want to use it with 3 Inch i dont recommend it!